<address id="1zrjd"></address>

    <form id="1zrjd"><th id="1zrjd"><progress id="1zrjd"></progress></th></form>
    <noframes id="1zrjd"><form id="1zrjd"><th id="1zrjd"></th></form>

      <address id="1zrjd"><form id="1zrjd"><th id="1zrjd"></th></form></address><address id="1zrjd"></address>

        抹面砂漿

        發布日期:2019-07-17 12:17:55 所屬欄目:保溫砂漿系統

        抹面砂漿.png

        抹面砂漿Plaster mortar

        一、產品用途

        聚合物抹面砂漿適用于外墻保溫系統的防護層,與耐堿玻纖網格布(熱鍍鋅鋼絲網)復合粘覆在保溫漿料上,形成增強保溫體系耐久性的保護層,提高體系的機械強度和抗裂性能。

        二、產品特點

        1.無毒無害無味,安全環保。

        2.粘結強度高、柔性好、抗滲、防水、抗裂等特點。

        3.施工方便,施工時無需振搗,在現場加水攪拌即可使用。

        4.具有優良的耐候、抗沖擊和防裂性能。

        、執行標準:JG 158-2004 《膠粉聚苯顆粒外墻外保溫系統》

        、施工方法

         聚合物抹面砂漿的配制是與水按41左右的比例,并在干凈的攪拌桶內先放適量清水緩緩倒干粉砂漿,浸潤后用機械攪拌器攪拌均勻。拌好的料在靜置10min后再次攪拌成粘稠料漿即可,并按使用規范要求抹面。一般墻體抹灰23mm,外墻體保溫抹底層砂漿2-3mm,貼壓網格布后抹面層砂漿12mm,抹面砂漿與基層必須粘結牢固無脫層、空鼓。

        、技術指標

        項    目性能指標

        拉伸粘接強度/Mpa

        (與水泥砂漿)

        未處理≥0.7
        浸水處理≥0.5

        凍融循環處理≥0.5

        拉伸粘結強度/Mpa

        (與膨脹聚苯板)

        未處理≥0.10,破壞界面在膨脹聚苯板上
        浸水處理

        凍融循環處理
        可操作時間/h≥2
        抗裂性5mm以下無裂紋


        、注意事項

         1、施工溫度5℃-35℃,風力不大于5級,施工過程中應避免雨淋。

         2、拌好的物料應在2小時內用完,忌再次攪拌或加入它材料攪拌。

         3、未開封保存陰涼干燥處,保質期6個月。


        Product use

        Mortar for protective layer on the external wall insulation system, and alkali fiberglass mesh cloth (galvanized steel wire) composite adhered to the insulating slurry, forming a protective layer that enhances durability of thermal insulation system, improve the system of the mechanical strength and the anti cracking performance.

         

        Product features

        1. innocuous innocuous and tasteless, safe and environmental protection.

        2. characteristics of high bond strength, good flexibility, seepage resistance, waterproof, crack resistance and so on

        3. the construction is convenient, without vibration in the construction, and can be used in the field with water mixing.

        4. has excellent weatherability, impact resistance and crack resistance.

         

        Construction method

        Preparation of polymer mortar and water according to the ratio of about 4:1, and the stirring barrel clean in the amount of water release slowly poured into the dry mortar, soaked with the agitator stirring. The mixture in static 10min again after mixing into a viscous slurry, and by the use of standard precausions. General wall plastering 2 - 3mm, the exterior wall insulation mortar with bottom 2-3mm, pressing the mesh after plastering mortar mortar and 1 - 2mm, the grassroots level must be firmly bonded without delamination and hollowing.

         

        Matters needing attention

        1. the construction temperature of 5 DEG C - 35 DEG C, the wind is not more than 5, in the construction process should avoid the rain;

        2. The mixed material should be used in 2 hours, and should not be stirred again or add water and other materials.

        3. Unsealed and dry place is not opened, and the shelf life is 6 months


        ?
        版權所有©加樂士(中國)建材有限公司     豫ICP備19023147號-2 技術支持:新云搜    后臺入口
        聯系電話
        掃一掃

        掃一掃
        微信二維碼

        免費服務熱線
        400-688-6905

        返回頂部
        国产精品国产精品一区精品国产自在现偷99精品国产在热2019国产拍偷精品网国产精品视频全国免费观看,国产精品v欧美精品v日韩精品青青精品视频国产久久国产精品久久精品国产亚洲精品国产精品国产欧美精品一区二区三区,国产精品第一页国产亚洲精品国产福利国产精品自拍国产精品视频在线观看亚洲国产精品一区二区久久国产精品国产三级国产专不,国产精品视频大陆精大陆国产国语精品2019精品国产品对白在线91年香蕉精品国产高清自在自线隔壁老王国产在线精品在线观看精品国产福利片,国产三级精品三级在专区精品国产自在现偷国产精品一区二区三区国产日韩精品欧美一区喷水亚洲精品国产精品国自产国产在线精品一区二区不卡